by Brad Jeffery | Nov 16, 2026 | Crimps
H106 Kidney Edge An edge for crimp and finger-strength training. 3D print the mould, fill it with resin and bolt it to your home climbing wall. 115mm wide x 106mm x 42mm high countersunk bolt approx. 66gms filament, 2.5h print time approx. 190ml resin to fill ...
by Brad Jeffery | Nov 16, 2026 | Slopers
H105 Globe An open-hand sloper for building grip strength and body tension. 3D print the mould, fill it with resin and bolt it to your home climbing wall. 50mm wide x 50mm x 45mm high countersunk bolt approx. 20gms filament, 1.5h print time approx. 35ml resin to fill...
by Brad Jeffery | Nov 16, 2026 | Crimps
H104 Triangle Edge An edge for crimp and finger-strength training. 3D print the mould, fill it with resin and bolt it to your home climbing wall. 85mm wide x 51mm x 35mm high countersunk bolt approx. 28gms filament, 2h print time approx. 50ml resin to fill ...
by Brad Jeffery | Nov 16, 2026 | Jugs
H103 Knob Jug A positive jug that is easy to hold – great for warm-ups, steep walls and kids. 3D print the mould, fill it with resin and bolt it to your home climbing wall. 78mm wide x 69mm x 33mm high countersunk bolt approx. 22gms filament, 1.5h print time approx....
by Brad Jeffery | Nov 16, 2026 | Slopers
H101 Rounded Pinch Sloper An open-hand sloper for building grip strength and body tension. 3D print the mould, fill it with resin and bolt it to your home climbing wall. 100mm wide x 83mm x 52mm high hexhead bolt approx. 50gms filament, 2h print time approx. 140ml...