H403 Egg Sloper

H403 Egg Sloper

H403 Egg Sloper An open-hand sloper for building grip strength and body tension. 3D print the mould, fill it with resin and bolt it to your home climbing wall. 100mm wide x 137mm x 40mm high hexhead bolt approx. 58gms filament, 2.5h print time approx. 200ml resin to...
H232 Round Sloper

H232 Round Sloper

H232 Round Sloper An open-hand sloper for building grip strength and body tension. 3D print the mould, fill it with resin and bolt it to your home climbing wall. 142mm wide x 142mm x 58mm high hexhead bolt approx. 98gms filament, 3h print time approx. 410ml resin to...
H231 Wave Sloper

H231 Wave Sloper

H231 Wave Sloper An open-hand sloper for building grip strength and body tension. 3D print the mould, fill it with resin and bolt it to your home climbing wall. 115mm wide x 135mm x 60mm high hexhead bolt approx. 80gms filament, 3h print time approx. 260ml resin to...
H230 Swoop

H230 Swoop

H230 Swoop An open-hand sloper for building grip strength and body tension. 3D print the mould, fill it with resin and bolt it to your home climbing wall. 67mm wide x 112mm x 47mm high countersunk bolt approx. 45gms filament, 2h print time approx. 110ml resin to fill...
H228 Split Dome

H228 Split Dome

H228 Split Dome An open-hand sloper for building grip strength and body tension. 3D print the mould, fill it with resin and bolt it to your home climbing wall. 75mm wide x 98mm x 33mm high countersunk bolt approx. 35gms filament, 2h print time approx. 85ml resin to...
H216 Dish Sloper

H216 Dish Sloper

H216 Dish Sloper An open-hand sloper for building grip strength and body tension. 3D print the mould, fill it with resin and bolt it to your home climbing wall. 114mm wide x 115mm x 41mm high hexhead bolt approx. 61gms filament, 2.5h print time approx. 200ml resin to...