by Brad Jeffery | Apr 26, 2026 | Slopers
H150 Medium Sloper with a small edge. 123mm wide x 127mm x 52mm high countersunk bolt 67gms filament, 2.5h print time Controls × Rotate with the left mouse button. Zoom with the scroll button. Adjust camera position with the right mouse button....
by Brad Jeffery | Apr 26, 2026 | Chips, Slopers
H149 Set of 9 varying angles 204mm wide x 150mm x 43mm high Variants: -10, -20, -30, -40, +10, +20, +30, +40 countersunk bolt 90gms filament, 3.5h print time Controls × Rotate with the left mouse button. Zoom with the scroll button. Adjust...
by Brad Jeffery | Apr 14, 2026 | Pinches, Slopers
H138 Small pinch sloper 100mm wide x 45mm high Hexhead bolt Controls × Rotate with the left mouse button. Zoom with the scroll button. Adjust camera position with the right mouse button. Double-click to enter the fullscreen mode. On mobile devices swipe...
by Brad Jeffery | Mar 27, 2026 | Slopers
H135 Triangle Sloper Climbing Hold. Has a pinch aspect to it as well. It’s nice and tall at around 100mm. Takes a 120mm hexhead bolt and a spinner screw up to 8mm. Print an opposite to use for a nice sloping pull up. Similar to H134 Controls × Rotate with...
by Brad Jeffery | Mar 27, 2026 | Slopers
H134 Triangle Sloper Climbing Hold. Has a pinch aspect to it as well. It’s nice and tall at around 100mm. Takes a 120mm hexhead bolt and a spinner screw up to 8mm. Print an opposite to use for a nice sloping pull up. Controls × Rotate with the left mouse...