H202 Mini Bucket

H202 Mini Bucket

H202 Mini Bucket A positive jug that is easy to hold – great for warm-ups, steep walls and kids. 3D print the mould, fill it with resin and bolt it to your home climbing wall. 70mm wide x 56mm x 30mm high countersunk bolt approx. 19gms filament, 1.5h print time...
H201 Twist Sloper

H201 Twist Sloper

H201 Twist Sloper An open-hand sloper for building grip strength and body tension. 3D print the mould, fill it with resin and bolt it to your home climbing wall. 69mm wide x 65mm x 42mm high countersunk bolt approx. 33gms filament, 2h print time approx. 65ml resin to...
H200 Hook

H200 Hook

H200 Hook A pinch for thumb strength and body positioning. 3D print the mould, fill it with resin and bolt it to your home climbing wall. 75mm wide x 99mm x 29mm high countersunk bolt approx. 30gms filament, 2h print time approx. 75ml resin to fill Variants: D1, D1...
H132 Angled Slab Edge

H132 Angled Slab Edge

H132 Angled Slab Edge An edge for crimp and finger-strength training. 3D print the mould, fill it with resin and bolt it to your home climbing wall. 149mm wide x 99mm x 34mm high countersunk bolt approx. 73gms filament, 2.5h print time approx. 250ml resin to fill...
H131 Half Barrel Pinch

H131 Half Barrel Pinch

H131 Half Barrel Pinch A pinch for thumb strength and body positioning. 3D print the mould, fill it with resin and bolt it to your home climbing wall. 152mm wide x 80mm x 61mm high hexhead bolt approx. 102gms filament, 3h print time approx. 460ml resin to fill...