by Brad Jeffery | Nov 16, 2026 | Jugs
H207 Incut Block Jug A positive jug that is easy to hold – great for warm-ups, steep walls and kids. 3D print the mould, fill it with resin and bolt it to your home climbing wall. 100mm wide x 50mm x 43mm high countersunk bolt approx. 42gms filament, 2h print time...
by Brad Jeffery | Nov 16, 2026 | Crimps
H206 Wedge An edge for crimp and finger-strength training. 3D print the mould, fill it with resin and bolt it to your home climbing wall. 117mm wide x 76mm x 28mm high countersunk bolt approx. 36gms filament, 2h print time approx. 80ml resin to fill Variants: D1, D2,...
by Brad Jeffery | Nov 16, 2026 | Crimps
H205 Wedge Edge An edge for crimp and finger-strength training. 3D print the mould, fill it with resin and bolt it to your home climbing wall. 98mm wide x 61mm x 26mm high countersunk bolt approx. 30gms filament, 2h print time approx. 50ml resin to fill Variants: D1,...
by Brad Jeffery | Nov 16, 2026 | Jugs
H204 Ramp Rail A positive jug that is easy to hold – great for warm-ups, steep walls and kids. 3D print the mould, fill it with resin and bolt it to your home climbing wall. 136mm wide x 81mm x 60mm high hexhead bolt approx. 82gms filament, 3h print time approx. 280ml...
by Brad Jeffery | Nov 16, 2026 | Slopers
H203 Wide Pad An open-hand sloper for building grip strength and body tension. 3D print the mould, fill it with resin and bolt it to your home climbing wall. 135mm wide x 86mm x 29mm high countersunk bolt approx. 46gms filament, 2h print time approx. 140ml resin to...