H95 Fin Pinch

H95 Fin Pinch

H95 Fin Pinch A pinch for thumb strength and body positioning. 3D print the mould, fill it with resin and bolt it to your home climbing wall. 122mm wide x 82mm x 33mm high countersunk bolt approx. 34gms filament, 2h print time approx. 75ml resin to fill  ...
H94 Spine Pinch

H94 Spine Pinch

H94 Spine Pinch A pinch for thumb strength and body positioning. 3D print the mould, fill it with resin and bolt it to your home climbing wall. 110mm wide x 75mm x 43mm high countersunk bolt approx. 30gms filament, 2h print time approx. 60ml resin to fill  ...
H92 Crimp Rail

H92 Crimp Rail

H92 Crimp Rail An edge for crimp and finger-strength training. 3D print the mould, fill it with resin and bolt it to your home climbing wall. 178mm wide x 50mm x 33mm high countersunk bolt approx. 49gms filament, 2h print time approx. 120ml resin to fill Variants:...
H90 Multi Pocket

H90 Multi Pocket

H90 Multi Pocket A pocket hold for finger and pocket training. 3D print the mould, fill it with resin and bolt it to your home climbing wall. 101mm wide x 106mm x 52mm high hexhead bolt approx. 72gms filament, 2.5h print time approx. 180ml resin to fill  ...
H89 Bubble Cluster

H89 Bubble Cluster

H89 Bubble Cluster An open-hand sloper for building grip strength and body tension. 3D print the mould, fill it with resin and bolt it to your home climbing wall. 155mm wide x 101mm x 65mm high hexhead bolt approx. 90gms filament, 3h print time approx. 310ml resin to...