by Brad Jeffery | Nov 16, 2026 | Jugs
H88 Wave Scoop A positive jug that is easy to hold – great for warm-ups, steep walls and kids. 3D print the mould, fill it with resin and bolt it to your home climbing wall. 112mm wide x 98mm x 59mm high hexhead bolt approx. 68gms filament, 2.5h print time approx....
by Brad Jeffery | Nov 16, 2026 | Jugs
H87 Block Jug A positive jug that is easy to hold – great for warm-ups, steep walls and kids. 3D print the mould, fill it with resin and bolt it to your home climbing wall. 75mm wide x 100mm x 44mm high hexhead bolt approx. 43gms filament, 2h print time approx. 150ml...
by Brad Jeffery | Nov 16, 2026 | Jugs
H85 Bubble Cluster A positive jug that is easy to hold – great for warm-ups, steep walls and kids. 3D print the mould, fill it with resin and bolt it to your home climbing wall. 115mm wide x 122mm x 57mm high hexhead bolt approx. 80gms filament, 3h print time approx....
by Brad Jeffery | Nov 16, 2026 | Slopers
H83 Bubble Sloper An open-hand sloper for building grip strength and body tension. 3D print the mould, fill it with resin and bolt it to your home climbing wall. 107mm wide x 116mm x 48mm high countersunk bolt approx. 55gms filament, 2.5h print time approx. 200ml...
by Brad Jeffery | Nov 16, 2026 | Pinches
H82 Arch Pinch A pinch for thumb strength and body positioning. 3D print the mould, fill it with resin and bolt it to your home climbing wall. 80mm wide x 76mm x 36mm high countersunk bolt approx. 33gms filament, 2h print time approx. 85ml resin to fill ...