H74 Scoop Jug

H74 Scoop Jug

H74 Scoop Jug A positive jug that is easy to hold – great for warm-ups, steep walls and kids. 3D print the mould, fill it with resin and bolt it to your home climbing wall. 95mm wide x 129mm x 59mm high hexhead bolt approx. 65gms filament, 2.5h print time approx....
H73 Arch Jug

H73 Arch Jug

H73 Arch Jug A positive jug that is easy to hold – great for warm-ups, steep walls and kids. 3D print the mould, fill it with resin and bolt it to your home climbing wall. 104mm wide x 126mm x 43mm high hexhead bolt approx. 61gms filament, 2.5h print time approx....
H72 Foot Holds

H72 Foot Holds

H72 Foot Holds Foot holds to fill out your wall and give your feet more options. 3D print the mould, fill it with resin and bolt it to your home climbing wall. 103mm wide x 59mm x 30mm high countersunk bolt, or screw-on versions (see variants) approx. 29gms filament,...
H67 Wide Crescent Edge

H67 Wide Crescent Edge

H67 Wide Crescent Edge An edge for crimp and finger-strength training. 3D print the mould, fill it with resin and bolt it to your home climbing wall. 214mm wide x 141mm x 39mm high countersunk bolt approx. 117gms filament, 3.5h print time approx. 490ml resin to fill...
H65 Crimps and Pocket

H65 Crimps and Pocket

H65 Crimps and Pocket An edge for crimp and finger-strength training. 3D print the mould, fill it with resin and bolt it to your home climbing wall. 128mm wide x 114mm x 43mm high countersunk bolt approx. 65gms filament, 2.5h print time approx. 200ml resin to fill...