by Brad Jeffery | Nov 16, 2026 | Crimps
H64 Crimps An edge for crimp and finger-strength training. 3D print the mould, fill it with resin and bolt it to your home climbing wall. 112mm wide x 124mm x 34mm high countersunk bolt approx. 57gms filament, 2.5h print time approx. 170ml resin to fill Variants:...
by Brad Jeffery | Nov 16, 2026 | Slopers
H59 Organic Sloper An open-hand sloper for building grip strength and body tension. 3D print the mould, fill it with resin and bolt it to your home climbing wall. 129mm wide x 130mm x 37mm high hexhead bolt approx. 66gms filament, 2.5h print time approx. 240ml resin...
by Brad Jeffery | Nov 16, 2026 | Pinches
H56 Box Pinch A pinch for thumb strength and body positioning. 3D print the mould, fill it with resin and bolt it to your home climbing wall. 77mm wide x 50mm x 48mm high hexhead bolt approx. 38gms filament, 2h print time approx. 60ml resin to fill Variants: Standard,...
by Brad Jeffery | Nov 16, 2026 | Slopers
H53 Large Faceted Slab An open-hand sloper for building grip strength and body tension. 3D print the mould, fill it with resin and bolt it to your home climbing wall. 188mm wide x 125mm x 43mm high hexhead bolt approx. 87gms filament, 3h print time approx. 320ml resin...
by Brad Jeffery | Nov 16, 2026 | Slopers
H52 Faceted Slab An open-hand sloper for building grip strength and body tension. 3D print the mould, fill it with resin and bolt it to your home climbing wall. 146mm wide x 105mm x 46mm high hexhead bolt approx. 61gms filament, 2.5h print time approx. 170ml resin to...