by Brad Jeffery | Nov 16, 2026 | Slopers
H49 Triangle Pinch Sloper An open-hand sloper for building grip strength and body tension. 3D print the mould, fill it with resin and bolt it to your home climbing wall. 100mm wide x 112mm x 64mm high hexhead bolt approx. 73gms filament, 2.5h print time approx. 250ml...
by Brad Jeffery | Nov 16, 2026 | Pinches
H44 Pinch Fin A pinch for thumb strength and body positioning. 3D print the mould, fill it with resin and bolt it to your home climbing wall. 75mm wide x 123mm x 41mm high hexhead bolt approx. 38gms filament, 2h print time approx. 150ml resin to fill Controls...
by Brad Jeffery | Nov 16, 2026 | Jugs
H42 Half Moon Scoop A positive jug that is easy to hold – great for warm-ups, steep walls and kids. 3D print the mould, fill it with resin and bolt it to your home climbing wall. 64mm wide x 80mm x 43mm high countersunk bolt approx. 34gms filament, 2h print time...
by Brad Jeffery | Nov 16, 2026 | Crimps
H41 Half Moon Edge An edge for crimp and finger-strength training. 3D print the mould, fill it with resin and bolt it to your home climbing wall. 42mm wide x 70mm x 37mm high countersunk bolt approx. 21gms filament, 1.5h print time approx. 25ml resin to fill Variants:...
by Brad Jeffery | Nov 16, 2026 | Slopers
H38 Giant Half Moon An open-hand sloper for building grip strength and body tension. 3D print the mould, fill it with resin and bolt it to your home climbing wall. 251mm wide x 275mm x 81mm high hexhead bolt approx. 223gms filament, 5.5h print time approx. 1500ml...