by Brad Jeffery | Nov 16, 2026 | Pinches
H401 Shark Fin A pinch for thumb strength and body positioning. 3D print the mould, fill it with resin and bolt it to your home climbing wall. 82mm wide x 108mm x 54mm high countersunk bolt approx. 50gms filament, 2h print time approx. 130ml resin to fill Variants:...
by Brad Jeffery | Nov 16, 2026 | Jugs
H400 Crescent Jug A positive jug that is easy to hold – great for warm-ups, steep walls and kids. 3D print the mould, fill it with resin and bolt it to your home climbing wall. 96mm wide x 144mm x 43mm high countersunk bolt approx. 50gms filament, 2h print time...
by Brad Jeffery | Nov 16, 2026 | Slopers
H232 Round Sloper An open-hand sloper for building grip strength and body tension. 3D print the mould, fill it with resin and bolt it to your home climbing wall. 142mm wide x 142mm x 58mm high hexhead bolt approx. 98gms filament, 3h print time approx. 410ml resin to...
by Brad Jeffery | Nov 16, 2026 | Slopers
H231 Wave Sloper An open-hand sloper for building grip strength and body tension. 3D print the mould, fill it with resin and bolt it to your home climbing wall. 115mm wide x 135mm x 60mm high hexhead bolt approx. 80gms filament, 3h print time approx. 260ml resin to...
by Brad Jeffery | Nov 16, 2026 | Slopers
H230 Swoop An open-hand sloper for building grip strength and body tension. 3D print the mould, fill it with resin and bolt it to your home climbing wall. 67mm wide x 112mm x 47mm high countersunk bolt approx. 45gms filament, 2h print time approx. 110ml resin to fill...
