by Brad Jeffery | Nov 16, 2026 | Pinches
H408 Stacked Pinch A pinch for thumb strength and body positioning. 3D print the mould, fill it with resin and bolt it to your home climbing wall. 98mm wide x 148mm x 61mm high hexhead bolt approx. 82gms filament, 3h print time approx. 330ml resin to fill Variants:...
by Brad Jeffery | Nov 16, 2026 | Crimps
H406 Framed Edge An edge for crimp and finger-strength training. 3D print the mould, fill it with resin and bolt it to your home climbing wall. 121mm wide x 130mm x 35mm high countersunk bolt approx. 52gms filament, 2h print time approx. 140ml resin to fill Variants:...
by Brad Jeffery | Nov 16, 2026 | Slopers
H405 Teardrop Volume An open-hand sloper for building grip strength and body tension. 3D print the mould, fill it with resin and bolt it to your home climbing wall. 195mm wide x 153mm x 48mm high hexhead bolt approx. 120gms filament, 3.5h print time approx. 550ml...
by Brad Jeffery | Nov 16, 2026 | Pockets
H404 Dimple Sloper A pocket hold for finger and pocket training. 3D print the mould, fill it with resin and bolt it to your home climbing wall. 150mm wide x 115mm x 62mm high hexhead bolt approx. 87gms filament, 3h print time approx. 370ml resin to fill Variants: D1,...
by Brad Jeffery | Nov 16, 2026 | Slopers
H403 Egg Sloper An open-hand sloper for building grip strength and body tension. 3D print the mould, fill it with resin and bolt it to your home climbing wall. 100mm wide x 137mm x 40mm high hexhead bolt approx. 58gms filament, 2.5h print time approx. 200ml resin to...
