H218 Lobed Edge

H218 Lobed Edge

H218 Lobed Edge An edge for crimp and finger-strength training. 3D print the mould, fill it with resin and bolt it to your home climbing wall. 111mm wide x 116mm x 43mm high countersunk bolt approx. 51gms filament, 2h print time approx. 170ml resin to fill Variants:...
H217 Twisted Jug

H217 Twisted Jug

H217 Twisted Jug A positive jug that is easy to hold – great for warm-ups, steep walls and kids. 3D print the mould, fill it with resin and bolt it to your home climbing wall. 83mm wide x 106mm x 45mm high countersunk bolt approx. 45gms filament, 2h print time approx....
H216 Dish Sloper

H216 Dish Sloper

H216 Dish Sloper An open-hand sloper for building grip strength and body tension. 3D print the mould, fill it with resin and bolt it to your home climbing wall. 114mm wide x 115mm x 41mm high hexhead bolt approx. 61gms filament, 2.5h print time approx. 200ml resin to...
H215 Shell Scoop

H215 Shell Scoop

H215 Shell Scoop A positive jug that is easy to hold – great for warm-ups, steep walls and kids. 3D print the mould, fill it with resin and bolt it to your home climbing wall. 107mm wide x 173mm x 49mm high countersunk bolt approx. 75gms filament, 2.5h print time...
H214 Blob Pinch

H214 Blob Pinch

H214 Blob Pinch A pinch for thumb strength and body positioning. 3D print the mould, fill it with resin and bolt it to your home climbing wall. 169mm wide x 134mm x 66mm high hexhead bolt approx. 98gms filament, 3h print time approx. 410ml resin to fill  ...