H213 Swirl Dome

H213 Swirl Dome

H213 Swirl Dome An open-hand sloper for building grip strength and body tension. 3D print the mould, fill it with resin and bolt it to your home climbing wall. 123mm wide x 93mm x 55mm high countersunk bolt approx. 58gms filament, 2.5h print time approx. 220ml resin...
H212 Lip Edge

H212 Lip Edge

H212 Lip Edge An edge for crimp and finger-strength training. 3D print the mould, fill it with resin and bolt it to your home climbing wall. 78mm wide x 79mm x 30mm high countersunk bolt approx. 28gms filament, 2h print time approx. 65ml resin to fill Variants: D1, D1...
H210 Dome Sloper

H210 Dome Sloper

H210 Dome Sloper An open-hand sloper for building grip strength and body tension. 3D print the mould, fill it with resin and bolt it to your home climbing wall. 79mm wide x 85mm x 36mm high countersunk bolt approx. 30gms filament, 2h print time approx. 70ml resin to...
H209 Cushion Sloper

H209 Cushion Sloper

H209 Cushion Sloper An open-hand sloper for building grip strength and body tension. 3D print the mould, fill it with resin and bolt it to your home climbing wall. 140mm wide x 124mm x 46mm high hexhead bolt approx. 65gms filament, 2.5h print time approx. 220ml resin...
H208 Teardrop Sloper

H208 Teardrop Sloper

H208 Teardrop Sloper An open-hand sloper for building grip strength and body tension. 3D print the mould, fill it with resin and bolt it to your home climbing wall. 134mm wide x 85mm x 43mm high countersunk bolt approx. 54gms filament, 2.5h print time approx. 150ml...