by Brad Jeffery | Nov 16, 2026 | Jugs
H96 Hook Jug A positive jug that is easy to hold – great for warm-ups, steep walls and kids. 3D print the mould, fill it with resin and bolt it to your home climbing wall. 46mm wide x 80mm x 37mm high hexhead bolt approx. 26gms filament, 1.5h print time approx. 70ml...
by Brad Jeffery | Nov 16, 2026 | Jugs
H88 Wave Scoop A positive jug that is easy to hold – great for warm-ups, steep walls and kids. 3D print the mould, fill it with resin and bolt it to your home climbing wall. 112mm wide x 98mm x 59mm high hexhead bolt approx. 68gms filament, 2.5h print time approx....
by Brad Jeffery | Nov 16, 2026 | Jugs
H87 Block Jug A positive jug that is easy to hold – great for warm-ups, steep walls and kids. 3D print the mould, fill it with resin and bolt it to your home climbing wall. 75mm wide x 100mm x 44mm high hexhead bolt approx. 43gms filament, 2h print time approx. 150ml...
by Brad Jeffery | Nov 16, 2026 | Jugs
H85 Bubble Cluster A positive jug that is easy to hold – great for warm-ups, steep walls and kids. 3D print the mould, fill it with resin and bolt it to your home climbing wall. 115mm wide x 122mm x 57mm high hexhead bolt approx. 80gms filament, 3h print time approx....
by Brad Jeffery | Nov 16, 2026 | Jugs
H74 Scoop Jug A positive jug that is easy to hold – great for warm-ups, steep walls and kids. 3D print the mould, fill it with resin and bolt it to your home climbing wall. 95mm wide x 129mm x 59mm high hexhead bolt approx. 65gms filament, 2.5h print time approx....
by Brad Jeffery | Nov 16, 2026 | Jugs
H73 Arch Jug A positive jug that is easy to hold – great for warm-ups, steep walls and kids. 3D print the mould, fill it with resin and bolt it to your home climbing wall. 104mm wide x 126mm x 43mm high hexhead bolt approx. 61gms filament, 2.5h print time approx....
