by Brad Jeffery | Nov 16, 2026 | Jugs
H42 Half Moon Scoop A positive jug that is easy to hold – great for warm-ups, steep walls and kids. 3D print the mould, fill it with resin and bolt it to your home climbing wall. 64mm wide x 80mm x 43mm high countersunk bolt approx. 34gms filament, 2h print time...
by Brad Jeffery | Nov 16, 2026 | Jugs
H29 Curved Rail Jug A positive jug that is easy to hold – great for warm-ups, steep walls and kids. 3D print the mould, fill it with resin and bolt it to your home climbing wall. 173mm wide x 86mm x 74mm high hexhead bolt approx. 92gms filament, 3h print time approx....
by Brad Jeffery | Apr 26, 2026 | Jugs, Pinches
H156 Pinchy Jug 120mm x 63mm high hexhead bolt 75gms filament, 2.5h print time Controls × Rotate with the left mouse button. Zoom with the scroll button. Adjust camera position with the right mouse button. Double-click to enter the fullscreen mode....
by Brad Jeffery | Apr 16, 2026 | Jugs
H148 JUG with low radius edge. 135mm wide x 135mm x 56mm high hexhead bolt 90gms filament, 3.5h print time Controls × Rotate with the left mouse button. Zoom with the scroll button. Adjust camera position with the right mouse button. Double-click...
by Brad Jeffery | Apr 16, 2026 | Jugs
H146 Jug 167mm wide x 116mm x 59mm high hexhead bolt 82gms filament, 3.5h print time Controls × Rotate with the left mouse button. Zoom with the scroll button. Adjust camera position with the right mouse button. Double-click to enter the...
by Brad Jeffery | Apr 14, 2026 | Jugs
H145 Jug 150mm wide x 150mm x 77mm high hexhead bolt 121gms filament, 4h print time Controls × Rotate with the left mouse button. Zoom with the scroll button. Adjust camera position with the right mouse button. Double-click to enter the fullscreen...
