by Brad Jeffery | Nov 16, 2026 | Tubes
H701 Tunnel Pocket A tunnel hold you can grab from several directions – wraps, pinches and pockets. 3D print the mould, fill it with resin and bolt it to your home climbing wall. 77mm wide x 109mm x 34mm high countersunk bolt approx. 42gms filament, 2h print time...
by Brad Jeffery | Nov 16, 2026 | Tubes
H700 Donut Tunnel A tunnel hold you can grab from several directions – wraps, pinches and pockets. 3D print the mould, fill it with resin and bolt it to your home climbing wall. 132mm wide x 142mm x 52mm high countersunk bolt approx. 112gms filament, 3.5h print time...
by Brad Jeffery | Apr 14, 2026 | Tubes
H142 Organic Tube 90mm wide x 90mm high Hexhead bolt Controls × Rotate with the left mouse button. Zoom with the scroll button. Adjust camera position with the right mouse button. Double-click to enter the fullscreen mode. On mobile devices swipe...
by Brad Jeffery | Apr 14, 2026 | Tubes
H141 Organic Tube 90mm wide x 90mm high Hexhead bolt Controls × Rotate with the left mouse button. Zoom with the scroll button. Adjust camera position with the right mouse button. Double-click to enter the fullscreen mode. On mobile devices swipe...
