by Brad Jeffery | Nov 16, 2026 | Tubes
H700 Donut Tunnel A tunnel hold you can grab from several directions – wraps, pinches and pockets. 3D print the mould, fill it with resin and bolt it to your home climbing wall. 132mm wide x 142mm x 52mm high countersunk bolt approx. 112gms filament, 3.5h print time...
by Brad Jeffery | Nov 16, 2026 | Slopers
H605 Mini Globe An open-hand sloper for building grip strength and body tension. 3D print the mould, fill it with resin and bolt it to your home climbing wall. 69mm wide x 68mm x 47mm high hexhead bolt approx. 42gms filament, 2h print time approx. 95ml resin to fill...
by Brad Jeffery | Nov 16, 2026 | Slopers
H602 Rounded Edge Sloper An open-hand sloper for building grip strength and body tension. 3D print the mould, fill it with resin and bolt it to your home climbing wall. 116mm wide x 94mm x 41mm high hexhead bolt approx. 52gms filament, 2h print time approx. 150ml...
by Brad Jeffery | Nov 16, 2026 | Pockets
H601 Hueco Sloper A pocket hold for finger and pocket training. 3D print the mould, fill it with resin and bolt it to your home climbing wall. 167mm wide x 120mm x 69mm high hexhead bolt approx. 111gms filament, 3.5h print time approx. 530ml resin to fill ...
by Brad Jeffery | Nov 16, 2026 | Slopers
H600 Bean Sloper An open-hand sloper for building grip strength and body tension. 3D print the mould, fill it with resin and bolt it to your home climbing wall. 164mm wide x 91mm x 65mm high hexhead bolt approx. 98gms filament, 3h print time approx. 470ml resin to...
