by Brad Jeffery | Nov 16, 2026 | Jugs
H413 Spout A positive jug that is easy to hold – great for warm-ups, steep walls and kids. 3D print the mould, fill it with resin and bolt it to your home climbing wall. 148mm wide x 125mm x 64mm high hexhead bolt approx. 92gms filament, 3h print time approx. 300ml...
by Brad Jeffery | Nov 16, 2026 | Slopers
H412 Ear Sloper An open-hand sloper for building grip strength and body tension. 3D print the mould, fill it with resin and bolt it to your home climbing wall. 97mm wide x 94mm x 49mm high hexhead bolt approx. 55gms filament, 2.5h print time approx. 140ml resin to...
by Brad Jeffery | Nov 16, 2026 | Jugs
H411 Bridge Jug A positive jug that is easy to hold – great for warm-ups, steep walls and kids. 3D print the mould, fill it with resin and bolt it to your home climbing wall. 103mm wide x 68mm x 42mm high countersunk bolt approx. 41gms filament, 2h print time approx....
by Brad Jeffery | Nov 16, 2026 | Slopers
H410 Lobed Sloper An open-hand sloper for building grip strength and body tension. 3D print the mould, fill it with resin and bolt it to your home climbing wall. 138mm wide x 128mm x 38mm high hexhead bolt approx. 76gms filament, 2.5h print time approx. 220ml resin to...
by Brad Jeffery | Nov 16, 2026 | Jugs
H409 Wide Scoop A positive jug that is easy to hold – great for warm-ups, steep walls and kids. 3D print the mould, fill it with resin and bolt it to your home climbing wall. 137mm wide x 98mm x 48mm high countersunk bolt approx. 91gms filament, 3h print time approx....
